The Domain Omni PX1 is purpose designed for operation with audiophile grade power amplifiers. The audio signal is separated into low and high frequency channels with a precision passive crossover network utilizing the highest quality components including only air-core inductors and polypropylene film capacitors. The PX1 can be bi-amplified if preferred or driven from a single amplifier.
The PX1 is a nominal 8 Ohm system up to about 5 KHz with minimum impedance of 2 Ohms load at 20 kHz due to the capacitive load of the electrostatic panels. In music there is very little spectral power above 5-10 kHz and as such, the PX1 is fully compatible with 4-8 Ohm rated amplifiers.
The audio step-up transformer delivering the critical audio signal to the electrostatic panel is a balanced-interleaved typology comparable to that used in the world’s finest tube amplifiers.
DOMAIN OMNI PX1
Type
Passive Omni-directional Hybrid Electrostatic
ESL Transducer Configuration
3 x 120 Degree Continuous Curve
ESL Dispersion
360 Degree Horizontal x 16 Degree Vertical
ESL Membrane Area
5,000 cm2
ESL Membrane Type
Ultra thin tensioned Mylar film (3.8 µm)
Maximum SPL
105 dB at 2m on axis
LF Enclosure
Architectural anti-resonant aluminum casting
LF Alignment
Sealed (Qts 0.68)
LF Driver Area (Sd)
640 cm2 (effective area of all 3 drivers)
Crossover
450 Hz, LR4
Frequency Response
30 Hz – 20 kHz (+/- 3 dB) Anechoic, 20 Hz – 22 kHz Typical Room
Sensitivity
82 dB (1W/1m)
Impedance
8 Ohm (nominal) 2 Ohm minimum at 20 kHz
Input Power
500 W (RMS) 1000 W (program peak)
Power Input for ESL Supply
18 VDC, 300 mA (max)
Dimensions (H x Diam.)
143.2cm x 44.7cm (maximum envelope)
Weight
66 kg
Features
Dual 5-way gold-plated binding post, Bi-wireable/Bi-amp capable, Feet with non-marring polymer pads (no spikes required)
Finishes
It takes several days, an eighteen-layer process of primer, paint and protective coatings, along with hours of hand polishing to create the Domain Omni PX1’s elegant, stunningly beautiful finish. Choose one of our standard finishes or select custom colours and enhanced finishes such as Pearls or Metallics. For the ultimate personalization you can work with our design team to create a one-of-a-kind finish to your specifications.
Pricing
Each pair of Domain Omni PX1s are hand made to order. Your PX1s can also be upgraded with custom paint finishes and trim options.