“Either I'm getting old and deaf, or Muraudio has done a close to miraculous job of integrating the four dynamic woofers per channel with their curved electrostatic panel.” - Malachi Kenney, Positive Feedback

1/6
MURAUDIO SP1

The award winning SP1 integrates Muraudio’s high output continuous curve projected point source ESL panel with bespoke custom designed six inch aluminum cone drivers to create a beautiful, immersive, panoramic sound stage. The SP1s full range 120 degree horizontal listening window delivers Muraudio’s signature “Sound is Everywhere®” listening experience with contemporary design and luxurious finishing.

 

Electrostatic loudspeakers (ESL) use electrostatically charged micro-thin polymer film suspended between two perforated aluminum plates to reproduce midrange and high frequencies. Muraudio’s Mylar Diaphragm Technology creates enhanced dynamics through improved distribution of acoustic energy across the continuous curve of the ESL, delivering clear, detailed, natural sound. The SP1s virtually weightless, ultra-light electrostatic film moves with speed and precision, producing ultimate sonic accuracy. The SP1s total harmonic distortion is so low that it is comparable to levels only measured in high end amplifiers.

 

The SP1s long throw six inch aluminum low frequency drivers are paired in two independently sealed cabinets, combined with proprietary, tuned inertial reactionary dampers for tight bass response. These ultra-rigid drivers accurately reproduce frequencies below 750 Hz, and move so uniformly that modal resonances are inaudible. Over 6 kg of magnet structure provides the necessary force for deep bass extension, achieving F(-3) = 45 Hz (anechoic).

 

Only professional grade, tight-tolerance premium components are used in the crossover and electronic systems. Air core inductors and Mundorf EVO oil capacitors ensure that critical high frequencies are perfectly reproduced. The SP1’s high voltage transformer uses a precision wide bandwidth interleaved balanced design with ultra-low leakage inductance, delivering clear highs without coloration, operating at low magnetic fields even at maximum power. The SP1’s multi-layer curved cabinet is designed for enhanced stiffness and low resonance. A stable acoustic center is maintained by mounting all drivers symmetrically in a D’Appolito configuration. The SP1 ESL panel and driver configuration are designed to produce a polar dispersion pattern similar to the ESL at the 750 Hz crossover, maintaining uniform tonality across wide horizontal positioning.

The SP1s managed to be very convincing not only in the one centered ideal position but over a wide area... the point-source nature of the imaging felt very natural. And compared to other hybrid electrostatics, well, when the chips are down, most instruments are not line sources. I would strongly urge you to find the Muraudio SP1s at a show or a dealer and spend some time listening to them carefully. This is a landmark speaker design. There has never been anything else like it. It is unique and sounds like real music in a way which escapes most speakers entirely. I think many people are going to find it matchlessly satisfying, if they can get a serious listen to it.

- Robert E. Greene

The SP1s had broad horizontal dispersion (this is no head-in-a-vise speaker) - the outputs of its five drivers blend so well that they sound like a single driver of nearly full range. It can play at volume levels from extremely low to well beyond loud enough equally well. I liked the way a pair of SP1s painted vast soundstages with well-focused aural images in my room, without sounding exaggerated or artificial. And all of that, without being difficult to set up. That’s a long list of accomplishments... Muraudio’s latest isn’t just one of the best-sounding speakers at the price - I’d wager it can knock the socks off many speakers costing considerably more.

   - Doug Schneider

SSHiFi-Logo.png

"The SP1s were very impressive, and made some of the most refined, convincing sounds of the show—and, indeed, in terms of spatial performance, there wasn't a bad seat in the house, and the hand-off between electrostatic and dynamic drivers was undetectable. Singing voices were silky-real, with natural-sounding timbres, good distinctions between head tones and chest tones, and sibilant sounds that were, for once in hi-fi, utterly perfect."

   - Art Dudley

stereophile.png
Reviews and Awards (click on logos to read more)
SSHiFi-Logo.png
CAAS Awards Updated.jpg
Audio Beatnik Logo.jpg
TAS POY 2019 LOGO FINAL.png
Soundstage 2018.png
sshifi_recref.png
Soundstage Reviewers Choice 250.jpg
TAS EDS CHOICE LOGO 2020 Transparent.png
sshifi_POTY_2018.png
TAS EDS CHOICE LOGO 2021 Transparent.png
Positive Feedback Logo.png
Finishes

Each SP1 is hand finished using state of the art technology to create a luxurious look. Rich, real wood textures and bold colours are available.

Solid Colours
Show More
Wood
Show More
Specifications

Type

Passive Hybrid Electrostatic

ESL Transducer Configuration

120 Degree Continuous Curve

ESL Dispersion

120 Degree Horizontal x 16 Degree Vertical

ESL Membrane Area

1,650 cm2 (active area)

ESL Membrane Type

Ultra thin tensioned Mylar film (3.8 µm)

LF Enclosure

Sealed design, curved multi-layer plywood, integrated upper and lower inertial reactionary mass dampers

LF Alignment

Sealed (Qts 0.72)

LF Driver Area (Sd)

340 cm2 (effective area of all 4 drivers)

Frequency Response

45 Hz – 20 kHz (+/- 3 dB) Anechoic, 35 Hz – 22 kHz Typical Room with gentle 12 dB/octave roll off of sealed design (versus 24 dB/octave of typical vented designs)

HxWxD

147 cm x 42.3 cm x 36.8 cm

Weight

45 kg

Maximum SPL

103 dB at 2m on axis

Crossover

750 Hz analog 2nd order Linkwitz-Riley

Sensitivity

86 dB (2.83V/1m)

Input

Dual 5-way gold plated binding post

Impedance

8 Ohm (nominal) 2 Ohm minimum at 20 kHz

Input Power

125 Watts Nominal (RMS) 250 Watts Maximum (Program Peak) Recommended amplifier 50-125 Watts RMS into 8 ohms

Please reload

Pricing

$19,500 USD per pair in standard colours and wood finishes.  Custom finishes available on request.

Tel. 1.855.955.0360 (Toll Free US & Canada)

Tel. 1.613.454.1790

info@muraudio.com

11 Tristan Court

Ottawa, ON, CANADA

K2E 8B9

©2021 MURAUDIO

CONTACT US
  • Grey Facebook Icon
  • Grey Twitter Icon