MURAUDIO PX2
The PX2 delivers a sleek design with a classic base plinthe, acoustically treated covers on the ESL panels and LF drivers along with trim enhancements and a sculpted top profile. The PX2 also incorporates the all-new Muraudio Speaker Bus (MSB). The MSB provides regulated ESL power and active speaker status monitoring to further enhance performance. The MSB is a bi-directional electrical interface that provides stable DC power to the ESL while at the same time displaying the operational power state of each loudspeaker with the Condition Monitor Module. The MSB ensures optimal performance of the PX2.
​
The PX2’s new internal crossover delivers deep bass response along with clean, more transparent mid-tones. It also boasts the latest in MDT (Mylar Diaphragm Technology). This lighter-than-air film responds with unparalleled speed and precision, delivering clarity, detail and natural sound that is unmatched by any other loudspeaker. The PX2’s continuous curve ESL technology pushes your “Sound Is Everywhere” experience to new heights allowing you to hear every nuance in your music at every volume level.
Muraudio Speaker Bus
Type
Passive Omni-directional Hybrid Electrostatic
ESL Transducer Configuration
3 x 120 Degree Continuous Curve
ESL Dispersion
360 Degree Horizontal x 16 Degree Vertical
ESL Membrane Area
5,000 cm2 (active area)
ESL Membrane Type
Ultra thin tensioned Mylar film (3.8 µm)
LF Enclosure
6.4 mm anti-resonant cast aluminum
LF Alignment
Sealed (Qts 0.72)
LF Driver Area (Sd)
640 cm2 (effective area of all 3 drivers)
Frequency Response
30 Hz – 20 kHz (+/- 3 dB) Anechoic, 20 Hz – 22 kHz Typical Room
Dimensions (H x Diam.)
147.3 cm x 57.4 cm (maximum envelope)
Weight
72 kg
Maximum SPL
105 dB at 2m on axis
Crossover
450 Hz analog 4th order Linkwitz-Riley
Sensitivity
82 dB (1W/1m)
Input
Dual 5-way gold plated binding post Bi-wireable/Bi-amp capable
Impedance
8 Ohm (nominal) 2 Ohm minimum at 20 kHz
Input Power
500 W (RMS) 1000 W (program peak)
Finishes
It takes several days, an eighteen-layer process of primer, paint and protective coatings, along with hours of hand polishing to create the PX2’s elegant, stunningly beautiful finish. Choose one of our standard finishes or select custom colours and enhanced finishes such as Pearls or Metallics. For the ultimate personalization you can work with our design team to create a one-of-a-kind finish to your specifications.
Pricing
Each pair of PX2s are hand made to order. Starting at $76,400 USD per pair, your PX2s can also be upgraded with custom paint finishes and trim options.
 |  |  |  |  |  |
|---|